| 논문실적 |
- 국제전문학술지(SCI급)
- Risk Response Analysis Model for Construction Method Using the Forced-Decision Method and Binary Weighting Analysis, Journal of Asian Architecture and Building Engineering, Vol.8, No.2, 2009.
- A Selection Model for Soil Retaining Walls in Construction Projects, Journal of Asian Architecture and Building Engineering, Vol.11, No.2, 2012.
- A Numerical Value Evaluation Model for the Optimum Design Selection, Journal of Asian Architecture and Building Engineering, Vol.11, No.2, 2012.
- Fundamental study on the development of forced carbonization reforming of low-quality recycled aggregates by using a nano-bubble method in Korea, International Journal of Applied Engineering Research, Vol.11, No.2, 2016.
- An Experimental Study on Lifting of Bridge Deck without Core Drill, Journal of Applied Engineering Research, Vol.12, No.3, 2017.
- Analysis on the Degree of Risk According to the Causes of Accidents in Construction Projects in Korea, Journal of Applied Engineering Research, Vol.12, No.11, 2017.
- Economic Feasibility of the Induction Heating Method for Dismantling Structures: Analysis of Reinforcement Recovery Costs based on Required Demolition Equipment, Journal of Applied Engineering Research, Vol.12, No.23, 2017.
- Investigation of Practitioners’ Perceptions for Developing Building Information Modelling (BIM) - Based Value Analysis Model, International Journal of Civil Engineering and Technology, Vol.9, No.1, 2018.
- Analysis Model of Cost-Effectiveness for Value Evaluation of Building Elements, Mathematical Problems in Engineering, Vol.2018, 2018.02
- Numerical Model for CPTED Evaluation of Korean School Facilities Built before CPTED, International Journal of Civil Engineering and Technology, Vol.9, No.9, 2018.
- ANALYSIS OF CO2 EMISSIONS DEPENDING ON THE USE OF HIGH-STRENGTH RE-BAR IN BUILDINGS. International Journal of Civil Engineering and Technology, Vol.9, No.9, 2018.
- Selection Model of Construction Method Using Pair-wise Comparison Matrix, International Journal of Civil Engineering and Technology, Vol.9, No.11, 2018.
- Comparison of High Strength Re-Bar Usage by Type of Building Structure In Korea, International Journal of Civil Engineering and Technology, Vol.10, Issue 04, 2019.
- LCC Analysis Model of Building Material That Can be used in BIM Environment, International Journal of Civil Engineering and Technology, Vol.10, Issue 04, 2019.
- Building Element Material Selection Model using Weighted Matrix, International Journal of Civil Engineering and Technology, Vol.10, Issue 05, 2019.
- Risk Assessment of Major Work Type for Prevention of Accident Occurring at Construction Sites in Korea, International Journal of Engineering Research and Technology. Vol.12, No.9, 2019.
- Safety Culture Evaluation Model at Construction Site, International Journal of Engineering Research and Technology, Vol.12, No.11, 2019.
- Schedule Monitoring Method using LPS and LOB-Based Daily Work Report Model in Construction Project, International Journal of Advanced Research in Engineering and Technology, Vol.11, Issue 4, 2020.
- Environmental Factors of Acceptance Organization Affecting Intention to Accept BIM, International Journal of Management, Vol.11, Issue 04, 2020.
- Risk Analysis on the Causes of Safety Accident at Construction Site in Korea using Eigen-vector, Journal of Engineering and Applied Science, Vol.15, Issue 05, 2020.
- Cost Evaluation Methodology That Can Be used In A 3D Architectural Design Environment, International Journal of Advanced Research in Engineering and Technology, Vol.11, Issue 5, 2020.
- An Inference Method of Safety Accidents of Construction Workers According to The Risk Factor Reduction of The Bayesian Network Model in Linear Scheduling, International Journal of Management, Vol.11, Issue 7, 2020.
- Appropriate Architectural Design Selection Model using Forced Decision Method, International Journal of Management, Vol.11, Issue 7, 2020.
- Risk Analysis Model for Selecting of Soil Retaining Wall in Construction Projects, International Journal of Management, Vol.11, Issue 8, 2020.
- Indexing Model Based on Vector Normalization Available for Value Engineering in Building Materials, Applied sciences, Vol.11, Issue 20, 2021.
- 국내전문학술지(KCI급)
- 중소규모 건축 및 엔지니어링 업역 간 협업설계를 위한 전문가 참여지원시스템 프로세스 구축, 대한건축학회논문집 계획계, Vol.25, No.6, 2009.
- 건설VE 최적대안 선정방법 및 의사결정지원 프로세스, 대한건축학회논문집 구조계, Vol.26, No.3, 2010.
- CBR+GA모델을 활용한 물량기반 철근콘크리트 골조공사비 산정 시스템 개발, 대한건축학회논문집 구조계, Vol.26, No.3, 2010.
- 적정 설계변경안 선정을 위한 의사결정지원 프로세스, 한국건설관리학회 논문집, Vol.11, No.2, 2010.
- 사례분석에 의한 설계변경 지원프로세스 개선에 관한 연구, 대한건축학회논문집 계획계, Vol.26, No.10, 2010.
- 주택재개발사업 기획단계에서 이용 가능한 수익성 예측 모델, 한국건설관리학회 논문집, Vol.14, No.1, 2013.
- 사업초기단계에서의 건물에너지 사용량 및 비용 평가 모델, 대한건축학회논문집 구조계, Vol.29, No.8, 2013.
- 정규화 기법 기반의 설계VE 기능 및 비용점수 산출 모델, 한국건설관리학회 논문집, Vol.16, No.4, 2015.
- 내진 보강용 철근 사용 시 비용 절감 효과 분석을 위한 실증적 연구, 한국구조물진단유지관리공학회 논문집, Vol.20, No.4, 2016.
- 다중 매트릭스 분석 기법을 이용한 최적 건축공법 선정 의사결정지원 모델, 한국건축시공학회지, Vol.16, No.4, 2016.
- 내력벽식 아파트를 대상으로 한 고강도 철근 사용에 따른 철근량 비교, 대한건축학회연합논문집, Vol.18, No.5, 2016.
- 복합 시설 프로젝트의 사업 가치 향상을 위한 리스크 관리 프로세스 구축 방안. 한국구조물진단유지관리공학회 논문집, Vol.22, No.1, 2018.
- 프로젝트 참여자의 협력적 의사결정이 가능한 QFD 기반 VE 모델, 한국건설관리학회 논문집, Vol.20, No.4, 2019.
- 건설현장의 안전문화 성숙도 평가에 관한 연구, 안전문화연구, 2021(12), 2021.
|
